Since I have you here, if you don't mind, I would like to give you some additional info on our Liquid and Hybrid Waxes and how to best use them with clay bar and polish, since the info on Amazon is limited. You might already be familiar with them, but this just provides a better understanding on how they all work together. It will be a little long so I apologize!
If you have waxed your vehicle before with any type of paste wax, it would be the exact same process.
The method to apply this and clay bar would be as follows:
Wash > Clay Bar > Polish > Quick Wash/Rinse > Thoroughly Dry Vehicle > Apply our Liquid Wax > Lastly, apply Hybrid Wax.
To dive in deeper; Since this is your first time applying our sealant, you need to make sure to remove all previous wax/sealants from your vehicle.
The best and cheapest method to do this would be to use regular dish soap instead of your car wash soap (i like Dawn, but most others would work also).
1) Simply wash your entire vehicle with this water and dish soap mixture.
2) When you're done and while your vehicle is still wet, empty your bucket and refill it with clean dish soap and water.
3) Use this clean water/dish soap as your clay lube. Simply use your car wash mitt to squeeze this liquid wherever you're using your clay bar.
4) After done clay bar. Rinse and dry your vehicle.
5) It will usually already look great. But if you want the extra step, you can polish it.
6) After the polish, a quick wash and thoroughly rinse your entire vehicle to get all of the polishing residue off.
7) Thoroughly dry your vehicle
8) Apply CarGuys Liquid Wax. Make sure to avoid all raw plastic and rubber surfaces. Try to keep about 2-3 inches away so no accidental application occurs.
9) Wait 30 minutes and then buff product off.
10) After buffing off, needs at least 6 hours cure time to allow the product to properly bond and cure. Don't let any moisture touch the vehicle during this time.
9) Apply CarGuys Hybrid Wax. (Safe to apply to every surface)
The next time you wash your vehicle, use your regular car wash soap, and simply top up again with our Hybrid Wax.
PS -- When applying the Liquid Wax, it's safe to apply to ALMOST every surface.
The surfaces we recommend to completely avoid using on are plastic and rubber.
The only type of plastics that are safe are 'shiny/glossy' painted plastic parts, headlights and taillights. Just make sure they are in good condition with no peeling/damaged areas.
It's the unfinished, raw, usually black or grey colored rubber/plastic such as window trim and plastic bumpers that sometimes have issues.
To avoid these areas we suggest applying 1-2" away. If you notice some accidental application, simply wipe it off before it dries.
Besides those rubber and plastics mentioned, every other surface is safe such as your glass, paint, metals, rims, chrome, plastics, decals, clear-bra, fiberglass, and more. We've even had customers use it in their homes, on their stainless steel appliances, granite tops, even the kitchen sink!
Hybrid Wax is safe to apply to any surface including the plastic and rubber :)